RF-CMBO 2.4GHz Wireless Combo
Package contents
• Keyboard
To install the mouse batteries:
Keyboard top
Mouse top
Mouse bottom
Legal notices
• Laser mouse
FCC Part 15
• 2.4G Receiver
• Installation CD
including User Guide
• AA batteries (4)
• Quick Setup Guide
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Prt Scr
Screen
Scroll
Lock
Pause
Break
Esc
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
_
-
+
=
~
!
@
2
#
3
$
%
5
^
&
7
(
)
Backspace
_
+
Page
Up
Num
Lock
*
Insert
Home
End
/
*
1
4
6
8
9
0
CONNECT
`
Q
W
E
R
T
Y
U
I
O
P
{
[
{
[
7
Home
8
9
PgUp
Page
Down
Delete
Tab
\
:
;
OFF
ON
A
S
D
F
G
H
J
K
L
"
'
4
5
2
6
Caps Lock
Shift
Enter
Features
Keyboard
• 104-key design
• Connect button
• LED showing pairing
and battery status
<
,
>
.
?
1
3
Z
X
C
V
B
N
M
Shift
/
End
PgDn
Enter
.
Del
Ctrl
Alt
Alt
Ctrl
0
Ins
• 18 hot-keys
• Power switch
• Soft palm rest
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
1 Press the tab to release the battery cover on the bottom of the mouse.
2 Install two AA batteries (included). Make sure that the + and – symbols on the
batteries match the symbols in the battery compartment.
3 Replace the battery cover.
#
1
2
3
4
5
6
7
8
9
Description
Calculator button
#
Description
#
1
2
3
4
5
6
Description
Left button
#
7
8
9
Description
FCC warning
12 Slide show button
13 Status LED
Mouse
Laser sensor
Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules
could void the user’s authority to operate this equipment.
Application switch button
Play/Pause button
Stop button
• Three mouse buttons (left, right, and middle)
• Tilt/scroll wheel
• Two hot-key buttons
• Power saving mode
• Excellent performance
• Working range up to 32.8 feet (10 meters)
• Dual-color status LED indicator
• Connect button
Forward button
Back button
Connect button
Power button
14 E-mail button
Setting up the keyboard and mouse
DHHS and FDA safety certification
15 Sleep button
1 Plug the 2.4 GHz receiver into an available USB port on your computer.
2 Slide the power switch of the mouse to ON, to turn the mouse on.
3 Slide the power switch of the keyboard to ON, to turn the keyboard on. The
computer recognizes the keyboard and mouse automatically.
The keyboard and mouse are ready to use.
This product is made and tested to meet safety standards of the FCC, requirements and compliance with safety
performance of the U.S. Department of Health and Human Services, and also with FDA Radiation Performance
Standards 21 CFR Subchapter J.
Right button
Tilt/scroll button
LED indicator
10 Battery cover
Previous track button
Next track button
Volume + button
Volume – button
Mute button
16 Home button
17 Search button
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe (B) est conforme à la norme NMB-003 du Canada.
18 My Favorite button
19 Back web page button
20 Forward web page button
21 Refresh web page button
22 Stop web page button
Setting up
Installing the batteries
To install the keyboard batteries:
1 Remove the battery cover on the
bottom of the keyboard.
RSS 310 statement
Installing the combo driver
10 Help button
• Power switch
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device
must accept any interference, including interference that may cause undesired operation of the device.
To use advanced functions, such as tilt wheel driver, dynamic search and magnifier,
you need to install the mouse driver and software.
11 Spelling button
2 Install two AA batteries (included).
Make sure that the + and – symbols
on the batteries match the symbols
in the battery compartment.
System requirements
1 Insert the installation CD (provided) in the CD drive on your computer. The
installation program should start automatically. If it does not start automatically,
open Windows Explorer, browse to the CD, then double-click autorun.exe.
The Rocketfish wireless combo screen opens.
2 Click Install Combo Driver. The Welcome screen opens.
3 Click Next. The Start installation screen opens.
• One available USB port (USB 2.0 or 1.1)
• Operating system: Microsoft® Windows® 7, Windows® Vista,
or Windows® XP with Service Pack 3 or higher
One-year limited warranty
Keyboard bottom
CONN EC
T
OF
F
ON
#
1
2
Description
© 2010 BBY Solutions, Inc., All Rights Reserved
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
Connect button
Power switch
4 Click Next. An installation progress bar appears.
When the installation is complete, the Setup Complete screen opens.
5 Click Finish.
3 Replace the battery cover.
QUICK SETUP GUIDE
ENGLISH 10-0214
|